Create a Snug Fitting Diaper WITHOUT PINS!
The best Cloth Diaper Fastener in the world!
The Snappi® Diaper Fastener revolutionized cloth diapering over 25 years ago! This all-in-one diaper fastener offers a practical and reliable way to fasten a cloth diaper. It is the cloth diapering necessity that “PULLS IT ALL TOGETHER.”™
NO LATEX NO SILICONE CPSIA COMPLIANT
Snappi®s are made from a stretchable non-toxic material. Their T-shaped stretchable arms have grips on each end, which hook into the diaper fabric ensuring a snug-fitting diaper with enough natural movement for baby’s comfort. A cover is essential over the Snappi® fastener to prevent it from catching onto something and coming undone.
The BENEFITS of the Snappi® include:
Snappi®s are available in 10 colors: White, Mint, Pastel Pink, Pastel Blue, Dark Blue, Purple, Dayglo Yellow, Dayglo Pink, Dayglo Green and Dayglo Orange
IMPORTANT NOTE: A Snappi® is NOT A TOY and should be used only as intended. It must always be fastened onto a baby’s diaper by an adult.
After endless requests from Snappi® users, a bigger Snappi® was introduced in 2007. The Size 2 Snappi® is better suited for larger babies and young toddlers. It is longer across the top ‘T’ of the Snappi®. Once stretched correctly, the Size 2 fastener gives an additional 4” stretch across the width than the Size 1 Snappi®. It comfortably fits up to a 30” waist.
AGE RECOMMENDATION: Although this depends largely on the size and shape of the baby or toddler, we recommend using the Size 2 Snappi® for children aged 16 months+
WARNING: Do NOT use a Snappi® on a child who is able to undo it or remove their diaper/diaper cover/clothing.
The Snappi® fastener underwent a ‘makeover’ in 2006. The basic shape and functionality remained the same, the only change being that the ‘rings’ at the end of each arm were replaced with a solid piece embossed with the Snappi® logo, and a crescent shaped loop. These loops give Snappi® an added SAFETY FEATURE.
When the Snappi® fastener is not in use, fold the loop over the back of the Snappi® end to fit over the teeth of the white grips – see photo above. This acts as a barrier and prevents the sharp teeth from being exposed.
NOTE: The loops are NOT to be pulled when attaching the Snappi® fastener to the diaper. When attaching the Snappi®, hold onto the solid part of the tab.
WARNING: Keep Snappi® fasteners out of children’s reach when not in use.
Snappi® fasteners must be used responsibly, and need to be used correctly in order to work effectively.
STRETCH the Snappi® fastener before its first use. The stretching triggers the ‘memory’ of the Snappi® to return to its original size, and in doing so, will pull the diaper to the middle to allow for a snug fit. It also makes it more pliable/elastic and therefore easier to use. This is essential for the Snappi® to work properly.
Holding the diaper in place with one hand, attach the Snappi® with the other hand in 3 simple easy steps:
In other words, the Snappi® fastener should go from a ‘T’ shape to a ‘Y’ shape.
When attaching the Snappi®, hold onto the solid part of the tab. DO NOT pull on the loops.
Make sure that the Snappi® teeth have gripped properly into the diaper fabric and that it is ATTACHED SECURELY with all 3 arms. The 3 points of tension are important as it is the third arm that will help prevent the Snappi from coming undone.
By following these instructions, the Snappi® should be secure and the diaper will fit snugly. It is ESSENTIAL to use a cover over the diaper and Snappi® fastener.
Snappi®s WORK BEST with terry cloth diapers, prefolds, and any other cloth diapers with a loose enough weave for the Snappi® to hook into. They DO NOT work well with tightly woven diapers, or diapers made from delicate fibres. They are only recommended for diapers where the diaper fabric is thick enough that the teeth on the grips do not touch baby’s skin.
By following these instructions, the Snappi® should be secure and the diaper will fit snugly.
1. A Snappi® is NOT A TOY. Keep out of children’s reach when not in use! 2. Replace your Snappi® if there is any physical damage or weak spots. 3. Do NOT use a Snappi® on a child who is able to undo it or remove their diaper/diaper cover/clothing. 4. Snappi®s should only be fastened by an adult. 5. Use a cover over a Snappi® fastener. 6. Do not leave your Snappi® in the sun for extended periods as this can eventually weaken the Snappi®.
Clean your Snappi® in hot soapy water. Do not launder with diapers in the washer as the grips could damage your diapers.
The Snappi® fastener is manufactured from FDA approved raw materials, which are degradable. It contains NO latex, silicone or any other adulterant, dilutent or modifying polymers. Snappis are CPSIA compliant for lead and phthalate content. Snappi®s are made in South Africa.
This unique product was invented by a father who experienced frustration changing his own child’s diapers. A snap solution to easier cloth diapering!
The first Snappi® was introduced to the South African market in 1987 at a trade fair where 4000 units were sold within days.
Covers Snappi® products against manufacturer’s defect for one month from date of purchase with proof of purchase from authorized registered retailers only. Breakages due to misuse of the product will not be replaced.
Warranty does NOT cover breakage of the loops on the Snappi®s. The loops are NOT to be pulled on when attaching the Snappi® fastener to the diapers. When attaching the Snappi®, hold onto the solid part of the tab. The loops are designed for the safety feature of the Snappi®, when not in use. The thin loop acts as a barrier preventing the sharp teeth from being exposed.